Re: {Chrysler 300} Fw: 55 Chrysler 300 Driveshaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Fw: 55 Chrysler 300 Driveshaft



Attached is a picture of the tool I found at the swap meet.  In case it doesn't come through, it's a Neapco TS2 Ujoint installation tool.

On Tue, Dec 1, 2020 at 11:17 AM 'mark love' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
I don’t live in a big city but I have access to experienced trades.
Working on this issue right now on my ’55 C69.  Need to check the housing and bearings on the ball and trunion for wear.  Mine went bad with poor maintenance and the boot deteriorated (worn bearings and scored bearing races).  Bernbaum had the internal replacement parts but I couldn’t find anyone with the correct body.  Really wanted to keep the car dead original but up against this issue, I ended up having a new conventional u joint set up fab’d for the front.  $500 but reliable.
Also, check the drive shaft angle on your car first with a spirit level.  A fairly tight tolerance at 3 degrees (check the manual for your specs.)  There are original Chrysler service videos on the issue you can find.
Just about to put mine back in.
M

On Dec 1, 2020, at 3:23 AM, Bob Merritt <bob@xxxxxxxxxxxxx> wrote:

Forwarding this message from Math Breitbach.

Replies to mfbreit@xxxxxxxxx


 I have vibration in my drive train & suspect the driveshaft is out of balance, so I took it to drive train shop, but they did not have proper hardware to spin balance.  Would you send out  a message asking the membership if they know anyone who is equipped to balance this shaft with the old type u-joints.   

-- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/emd250d46c-04a2-46e0-a96f-0d073ba412ea%40backup-pc.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9A3FA6B3-70B5-4B3F-B03F-C3BAE9782F08%40me.com.


--

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnvMKaoG3dvibSrNWd0%3DKcbXT3KoydinN1S6HZBa5Bwvug%40mail.gmail.com.

Attachment: Ujoint tool.JPG
Description: JPEG image



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.