Re: {Chrysler 300} FREE Chrysler Parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} FREE Chrysler Parts



Hello John,

Interested in the wire wheels with center caps, 61 seat frame ( is it a beach seat or buckets?), one steering wheel and the ram exhaust pipes.
I can be there before Thanksgiving I live on Long Island. Please let me know.
Thank you.

Best regards,
Peter  61 Stick


On Sunday, November 8, 2020, 09:43:36 AM EST, 'John R. Cote' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


Hi Folks,

Bring a big truck or truck and trailer.  Due to loss of space and I’m tired of moving it around, THE FOLLOWING ITEMS ARE FREE,   BUT must be picked up on site. NO shipping. Deadline for pick up is November 31. Pick up site - Guilford, Connecticut.

5 - Chrysler -Motor Wheel Co. 15” wire wheels with center caps.  Solid but rusty. Tires still
             mounted on wheels.

’56 Chrysler hood - pretty solid.
 
’56 Imperial 4 way power seat - complete with switch and ends except for courtesy
        lights.

THREE - ’56 Powerflite transmissions - one might have been from a '56 “B” but not sure.

1 - ’56 Torque converter

3 - ’56 Chrysler NYer front bumpers, one driver quality, two good cores.

1 - ’56 Chrysler rear bumper - good core.

1 - ’55 -’56 Chrysler Front windshield for 2 dr. - clear (no tint)

2 - ’56 Chrysler Rear windows for 2 dr. - one Solex, one Clear

1 - ’56 Chrysler steering column plus assorted '56 Chrysler dashboard sections

1 - ’57 Chrysler 300C convertible, original leather upholstery, very dry, driver condition.
            No door panels or other trim pieces.

1 - ’60 -’61 original Chrysler Front “Bubble top” Windshield - Solex - some perimeter
              lower corner delamination not hidden by gasket but overall very nice.

1 - ’61 Power seat frame with motors, aluminum seat ends with switch, very rusty on one
            end.  May fit ’60 ?

2 - '61 or '61 Chrysler Steering wheels, good cores for recasting.

1 - set ’60 -’61 Crossram exhaust pipes, never installed, Not sure if complete or correct.

1 - ’56 Chrysler starter, needs rebuild.

1 - ’60 Chrysler New Yorker 4 door HT that still has 413 and Torqueflite. Unknown
            condition of the engine or tranny.  Non-restorable, totaled rusty hulk, no dash,
           some parts already removed, still on 4 wheels, sans one rear axle. Pick what’s left.

5 - Coker 800 x 15 bias ply wide white wall tires, look like new and nice but because
          they’re VERY old, best use only when you need tires during restoration.

Hope all this helps someone,
John R. Cote
Member since '97



--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1839679716.3054313.1604846611184%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1995300374.3127486.1604868533018%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.