RE: {Chrysler 300} Distributor wiring

Dennis, i did mine this summer. Totaly restored, with a modified La waccum can.

For wires i looked for same quality that comes with a quality multimeter test probes , so all new silicon wires, high heat resistant. Worked as a charm!

Thanks Michael

Skickat från min Samsung Galaxy-smartphone.

-------- Originalmeddelande --------

Från: "Williamson, Dennis G" <Dennis.G.Williamson@xxxxxxxxxx>

Datum: 2020-11-02 13:12 (GMT+01:00)

Till: chrysler-300-club-international@xxxxxxxxxxxxxxxx

Ämne: {Chrysler 300} Distributor wiring

Hi All,

Does anyone have a recommendation on a specific wire type to be used when rebuilding a 57 300C distributor? I am looking for a very flexible wire to renew all the internal wiring, ground strap to plate, power wires to points.

Dennis Williamson

Manteca CA.

NOTICE: The information contained in this message is intended only for the personal and confidential use of the recipients named above. This message is privileged and confidential. If the reader of this message is not the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete the message from your system

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/8825d707dad04f718a9918d7efd95c66%40snapon.com.