On 10/3/2020 4:40 PM, ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] wrote: > > > I am getting ready to make up the master to brake union lines for my > dual master cylinder conversion on my 64 K. The single master > understandably used a 1/4" line to the union which fed all four corners > with drum brakes. > Has anyone one done this conversion and used 3/16" lines to feed both > the front and rear circuits? I bought a kit with the lines and all the > nuts for 3/16" lines, but now is the time to decide if the 1/4" in the > front would have any advantage for the difference in size and effort. > Just one of those nagging questions the voices keep asking me! > > Allan If you 'bigger' did you take into account CLIPS to fit?? -- Paul Holmgren JCI #74145 To announce that there must be NO criticism of the President, or that we are to stand by the President Right or Wrong, is not only UNPATRIOTIC and SERVILE, but is Morally TREASONABLE to the American Public. Former Republican President, Theodore Roosevelt ------------------------------------ Posted by: paul <paulholm@xxxxxxxxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/