Re: [Chrysler300] Dual master brake lines
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Dual master brake lines





Just opinion , should make no difference st all . Two lines now. Same CC 

Sent from my iPhone not by choice 

On 3 Oct 2020, at 4:40 pm, ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I am getting ready to make up the master to brake union lines for my dual master cylinder conversion on my 64 K. The single master understandably used a 1/4" line to the union which fed all four corners with drum brakes.
Has anyone one done this conversion and used 3/16" lines to feed both the front and rear circuits? I bought a kit with the lines and all the nuts for 3/16" lines, but now is the time to decide if the 1/4" in the front would have any advantage for the difference in size and effort. Just one of those nagging questions the voices keep asking me!

Allan


__._,_.___

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.