[Chrysler300] Quick question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Quick question



Working on 300 F tach , (f-j ) essentially the same ?
Tach ok but went to put in its can and noticed another one I had , the oil fill hole on back was not on top but  angled     This one is different , oil hole either straight up or straight down , but if put straight up ( common sense)  the wire  is different than it seems to want to be . Or was . 
Rather than get into all that it comes down to where the three 120 degree mount tabs are in the console , one mount tab is split like a U two are plain holes in tabs . One way , U is Down at bottom center where the rpm letters are . ( I think is right ) other way U tab is on top , two ears are either side of centerline at bottom .   Crazy thing , the model one could be wrong or right as never paid attention to this till now . Seems to assemble either way ok except wire . 
If you are working on a front console , or have a tach , is it one bolt on top , two at bottom or two at top one in middle at  bottom     ?
Not in a place where I can go look , so I am stopped ! 
Always take a  picture ! 
Thanks , John 

Sent from my iPhone not by choice 

------------------------------------
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.