[Chrysler300] 64 300 light switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Chrysler300] 64 300 light switch
- From: "Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
- Date: Mon, 24 Aug 2020 12:24:31 +0000 (UTC)
finally had time to remove inst cluster.Compared originall light switch to new one.
I did notice that the copper tab that is on right lower side is corroded
This moves up and down as dimmer / stem moves right to left.
Any chance that corrosion goes inside the sealed part of switch, and causes inst lights to work when motor is running without use of headlight switch.
I did not have time to cut old switch apart and see if corrosion creeper into other spades.
This I will do after return to house.
I also switched out the circuit boards.
Dave
__._,_.___
Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
__,_._,___
Back to the Home of the Forward Look Network
Archive Sitemap