[Chrysler300] Steering box vs coupler index

["Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

well,

I thought the alignment of the 64 steering shaft coupler was good.

But, the slot on the coupler needs to  be in a 3 to 9, or horizontal position. 

With the wheels in straightforward,  the coipler is almost 12 to 6, or vertical.

So  with box all in, and bolted up, I have room to push pin out, then realign the coupler in correct position for shaft and steering  wheel alignment.

Has any one else flubbed this coupler position?

Trying not to remove box again.

Thanks,

No  storm damage here in Va

Dave D

Sent from Yahoo Mail on Android

__._,_.___

---

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___