[Chrysler300] 300K wheel valve stems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 300K wheel valve stems

Looking for wheel valve stems to fit a 300K with the original wheelcovers. Looks like they need to be at least 2 ½” long. I tried a cover on a wheel with a 2” stem and it’s just flush with the hole.  I can’t find long ones except for metal ones and that’s a no no on these.


What are people using? Extenders? I assume the factory must have used ones long enough to clear the wheel cover but it’s been so long since I had my ’64 300 I don’t remember.




Posted by: <nick@xxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.