Re: [Chrysler300] Transmission mount-The 4-speed IS different

I just checked EBay

They are loaded with sellers.

As cheap as 14.00 as high

As 78.00. Buyer beware.

Bob Haag

On Jun 15, 2020, at 7:26 PM, John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I did not look it , personally a lot of garbage mounts some are springs some are not . So experts decided spring then no spring . I just redrill what I have to fit . May need to find original bolts too .

Next to original gas and battery acid . Just me , but agree, get right stuff if you can . Personally ,100’s of Part’s from rock auto , yet to screw up . Might look different — and fit fine .... that mount is not rocket science ?

Anyway , hope he gets on road ..

Sent from my iPhone not by choice

On 15 Jun 2020, at 6:56 pm, < dverity@xxxxxxxxxxx> < dverity@xxxxxxxxxxx> wrote:

Wrong. The mounts shown are the wrong ones. Kanter lists a mount for 65-68 for $188.00. Rock Auto and parts stores are usually wrong about these years...

Don

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Monday, June 15, 2020 5:10 PM

To: DR CHALLENGER

Cc: Steen Pedersen ; Chrysler300@xxxxxxxxxxxxxxx

Subject: Re: [Chrysler300] Transmission mount

Hi as stated elsewhere , also a common part .. as stock pieces — rock auto .

Sorry to hear they stopped. Some designs of theirs were excellent — interleaved steel and rubber “sandwich, “ not subject to rubber ripping off the steel on engine mounts and I think trans too. Went through all that — factory “bonded “ mounts are frankly garbage . Why later mopar motor mounts use through horizontal bolt and spool style mounts . Cannot rip off.

Way it goes ..

Sent from my iPhone not by choice

On 15 Jun 2020, at 4:08 pm, DR CHALLENGER drchallenger@xxxxxxxxxxx [Chrysler300] < Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

They went out of business over a year ago

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: Monday, June 15, 2020 2:50 PM
To: Steen Pedersen
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Transmission mount

Hi I believe Schumacher Creative Services ( make mopar engine swap mounts) have a series of trans mounts too . They are pretty good !
John

Sent from my iPhone not by choice

> On 15 Jun 2020, at 1:06 pm, Steen Pedersen jetsteen@xxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
>
> Hello Group I need a Transmission mount for my 300 Sport 1965 automatic I think it is the same as 300 L as they have the same body and Transmission can anyone tell me where I can get it.
>
> With best regards
> Steen Pedersen
> Denmark
>
> ------------------------------------
> Posted by: Steen Pedersen <jetsteen@xxxxxxxxxxxxxxxx>
> ------------------------------------
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
>
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
>
> Yahoo Groups Links
>
>
>