I just checked EBay
On Jun 15, 2020, at 7:26 PM, John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
I did not look it , personally a lot of garbage mounts some are springs some are not . So experts decided spring then no spring . I just redrill what I have to fit . May need to find original bolts too .
Next to original gas and battery acid . Just me , but agree, get right stuff if you can . Personally ,100’s of Part’s from rock auto , yet to screw up . Might look different — and fit fine ... that mount is not rocket science ?Anyway , hope he gets on road ..
Sent from my iPhone not by choiceWrong. The mounts shown are the wrong ones. Kanter lists a mount for 65-68 for $188.00. Rock Auto and parts stores are usually wrong about these years...DonHi as stated elsewhere , also a common part .. as stock pieces — rock auto .
Sorry to hear they stopped. Some designs of theirs were excellent — interleaved steel and rubber “sandwich, “ not subject to rubber ripping off the steel on engine mounts and I think trans too. Went through all that — factory “bonded “ mounts are frankly garbage . Why later mopar motor mounts use through horizontal bolt and spool style mounts . Cannot rip off.Way it goes ..
Sent from my iPhone not by choice
On 15 Jun 2020, at 4:08 pm, DR CHALLENGER drchallenger@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
They went out of business over a year ago