[Chrysler300] Re: J/K Ram car inner fenders question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Re: J/K Ram car inner fenders question





I've found it immensely faster and easier to change the plugs on my J with an open end wrench from underneath.  I just jack it up enough to put it on jackstands.  No need to remove the front wheels and panels.  It was my understanding that the panels aren't for spark plug access. The inner fender openings were to allow the assembly line body drop to clear the air cleaners on the engine and the panels were only to cover the opening.  

Virus-free. www.avast.com


__._,_.___

Posted by: Lynn Dunsworth <lynnrd37@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.