Sent: Wednesday, April 01, 2020 10:39 AM
Subject: [Chrysler300] Heater Switch Replacements
I
would like to ask for input as to any known differences in the MOPAR heater/AC
switch line. The original part number for my 64 and perhaps prior is 2096084.The
final part number of this run I believe is 3502126. I find that the K switch #
was superseded by many subsequent part numbers. I am wondering what might be the
changes to this switch, and why?
My
question basically is, does the 3502126 work as well or better than they
original #, or is there a particular switch in the chain to stop at if the
switch did change in design in any way, making it less unsuitable for my
K?
As
you can imagine, the NOS 2096068 is priced by the ounce and still it is 56 years
old. The later switches less so, and more reasonably priced the newer they get
to '84. Great news if they in fact all work to spec.
I
question all this as I just had to chase down replacements for the four cooked
vacuum actuators of the car. HOLY COW!
As
the dash is apart, I feel it wise to replace the switch- and the cable that the
PO botched after "fixing" it.
Good
news on my heater motor as well. I took it apart, cleaned up the commutator and
bushings and refreshed the oil felts.
Onward!
Allan
__._,_.___ Posted by: <dverity@xxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |