Re: [Chrysler300] rheostat 1964
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] rheostat 1964





To likely repair your switch check out the wiper (contact to the rheostat) because it probably deformed due to heat.  It should only touch at the V shaped end of it.  If it is more than that then bend it to correct the angle.

On Sun, Mar 29, 2020 at 6:42 PM Marshall Larson <granitledge@xxxxxxxxx> wrote:
What is the shape of the headlight stem? If it is a triangle them I strongly suspect that a NAPA part #HL6571SB is the proper new switch.  I got that number from Bob Merritt.

On Sun, Mar 29, 2020 at 4:11 PM Harry Torgeson torg66@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Hi group, I need help finding a headlight rheostat, my mechanic cleaned my current one but the results are dim interior lights at night, so I'm going to replace it.

Thanks in advance
Harry



--
Marshall Larson


--
Marshall Larson


__._,_.___

Posted by: Marshall Larson <granitledge@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.