Re: [Chrysler300] 64 Quarter panel project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 64 Quarter panel project





Dave...Happy New Year   !!!

While I do work at Eastwood I am not an expert, not even a novice, at what you are doing. Perhaps you should follow Mike's advice.

Whichever way you are going to do this I would strongly suggest calling Eastwood for their advice and suggestions. They have the best customer service and tech support and I am not just saying this because I work there. When you call ask to speak to Matt Murray.
Also Eastwood has lots of videos that you can find online. Check out this video. This might be a better way than using a panel flanger . I would still get Matt's opinion  on the best procedure.

Bye and have a great day.

Charlie Valentine
https://www.bing.com/videos/search?q=eastwood+youtube+panel+flanging&view=detail&mid=3D85ABA0B4C30C49F2513D85ABA0B4C30C49F251&FORM=VIRE "

eastwood youtube panel flanging - Bing video




On Friday, January 3, 2020, 06:33:20 PM EST, Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


 

Hello Members,

I finally found time and tools to remove quarter panel skin from semi frame up to door jamb.

This is a big section of 300, spot weld cutters and abrasive cutting wheels are engaged.

I should have outer skin and trunk extension removed, in one piece, with more than enough steel left.

I will be using Eastwood flanger tools. My big question is.. when ready to cut into the vehicle, a long seam will exist.

Does the car section get flanged, or does the donor skin get flanged.

I intend to cut into the 300 after the Spring meet. should be interesting, having straight panels with tight fitting trim.

Any tips or experience will be accepted.

Thanks all,

Dave in Va.



__._,_.___

Posted by: Charlie V <cv300g@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.