[Chrysler300] 64 Quarter panel project

["Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hello Members,

I finally found time and tools to remove quarter panel skin from semi frame up to door jamb.

This is a big section of 300,   spot weld cutters and abrasive cutting wheels are engaged.

I should have outer skin and trunk extension removed, in one piece, with more than enough steel left.

I will be using Eastwood flanger tools.  My big question is.. when ready to cut into the vehicle, a long seam will exist.

Does the car section get flanged, or does the donor skin get flanged.

I intend to cut into the 300 after the Spring meet.   should be interesting, having straight panels with tight fitting trim.

Any tips or experience will be accepted.

Thanks all,

Dave in Va.


------------------------------------
Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/