Mike: I have a pair of restored 2903SH’s that came with a likely ’60-’61 ram setup on the 300K ram block of the 300 Koupe parts car I bought for its engine. Red paint on the rams. No telling why the top end was replaced by previous owner. Perhaps stolen or burnt out? I have no history on that car. All spec’s seem to be the same, so I figure they will work fine on my short ram engine-someday. If you or the readers could help me find a good pair of proper 3505’s from a J or K ram car, I would part with the 2903’s while trying to stay whole. Dunno if air cleaners are different, so might want to watch that. I have the air cleaners that came with the rig in primer. Rich Barber Brentwood, CA From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of my65cuda my65cuda@xxxxxxx [Chrysler300] If anyone has a pair, I’m interested. __._,_.___ Posted by: "Rich Barber" <c300@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |