Re: [Chrysler300] 57 U joint rear
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 57 U joint rear

Bernbaums used to have them a long time ago. I doubt they have any now. If the caps with the tabs are still good, you can get a regular joint and reuse them.
Sent: Tuesday, March 12, 2019 10:57 AM
Subject: [Chrysler300] 57 U joint rear

Hi,  surprisingly, none available at NAPA ,Rock or ebay ; this is the smaller joint with two caps that have wings for the 4 bolts, rollers are integral in the wings , no U bolts or snap rings on the half that bolts to 8 3/4 axle flange .
Anyone have one or a cross to a valid source? Thanks, john


Posted by: <dverity@xxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.