[Chrysler300] 57 U joint rear
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 57 U joint rear

Hi,  surprisingly, none available at NAPA ,Rock or ebay ; this is the smaller joint with two caps that have wings for the 4 bolts, rollers are integral in the wings , no U bolts or snap rings on the half that bolts to 8 3/4 axle flange .

Anyone have one or a cross to a valid source? Thanks, john 


Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.