Re: [Chrysler300] 61 G dashboard
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 61 G dashboard

That’s the way the factory did it.

Bob Haag

Sent from my iPhone

On Nov 20, 2018, at 3:52 PM, Ray Jones 1970hurst@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


By installing all components in the dash first, you have better quality control.
You are able to see that all attachment nuts, all wiring connections and all routing of the wires is right.
When done, it's a matter of setting the dash in place, mounting a few nuts or bolts and plugging in 1 or 2 connectors.
It's  a lot more fun that way, and with some careful reading of the Service Manual, you can test most of the components.
Put a blanket on the workbench so as not to scratch up the dash face.
Have fun, Ray

On Tue, Nov 20, 2018 at 2:17 PM jrhoades47@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

When reinstalling the dashboard is it better to just put in the basic shell and then add all the components or should some things like the glove box, radio be added to the basic shell and then reinstalled?  We have seen pictures of rebuilds showing some both ways.....any advice is appreciated.

If I have stated my question in a confusing manner please feel free to clarify anything....I continue to swim in unfamiliar water for sure!

Ray Jones. Y'all come on down an see us. Ya hear?


Posted by: scooter465@xxxxxxx

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.