Re: [Chrysler300] 1961 Chrysler 300 G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1961 Chrysler 300 G

Does your car have power seats? If so, the seat switch mechanism may be covering the cut out on the one installed on your car. Sounds like the cut out for the switch if same as an F. 

Sent from my iPad

On Oct 10, 2018, at 4:54 PM, 'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Hi There,
I am trying to figure out an extra piece of plastic that I found in the trunk of my 61 300G.  It's the same kind of thin plastic that surrounds the front seats to hide the seat mechanism.  I have both of those. It's about 19" long and about 6" wide with a distinct hole cut-out about 2" in diameter in the upper part.  The piece is curved with a couple of fastener holes on the top flange.
Any help would be appreciated!
Mike 300G


Posted by: Lindsey <lindsey@xxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.