Re: [Chrysler300] 65 and newer 8 3/4 rear axles

["'czbill@xxxxxxxxxx' czbill@xxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

You may find these sites to be helpful.  In my experience as much as
1" difference in spring perch distance translates to 1/2" per
side, and for daily use the springs easily accommodate that.

Bill Huff

https://www.allpar.com/forums/threads/rwd-axle-widths-and-interchange.117913/

http://gasalley.thetumbleweeds.net/tech_archive/mopar/chrysler_8_3.htm

https://www.bigblockmopar.nl/tech/mopar-rearaxle-dimensions/





At 11:38 PM 8/26/2018, 'skyhawk@xxxxxxxxx' skyhawk@xxxxxxxxx
[Chrysler300] wrote:

 

Hi everyone,
I looking for information as to which 65-up C-body 8 3/4 rear axle( the whole thing, drum to drum) is the least difficult to install in a 61 300G, especially information from someone in our group who has done a swap like this. Perhaps they can tell me which cars I need to be looking at as a possible donor. Thanks in advance. Dennis

---

Virus-free. www.avast.com

__._,_.___

---

Posted by: "czbill@xxxxxxxxxx" <czbill@xxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___