Re: [Chrysler300] 300G Heater Hose Routing

["Andy Mikonis r41hp@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

You can see them both ways in original press kit and magazine road test photos. I haven't been able to find any pattern, though I'm pretty certain they came both ways.

Andy

On Aug 17, 2018, at 5:54 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

    Greetings all,

                          I have noticed several 300 G's that have the above laying across the top of the Ram Manifolds. I'm sure this is incorrect as they should be ran as copper tubing under the manifolds. Mine are copper under the manifolds.  Thoughts ?

                                                                                                        

                                                           Thanks,

                                                           Val J

__._,_.___

---

Posted by: Andy Mikonis <r41hp@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___