Re: [Chrysler300] Stainless Steel Trim Restoration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Stainless Steel Trim Restoration





Jim,

It's possible to learn to do it yourself. I did, and I rather enjoyed figuring out how to (tediously) work through the steps and get very nice results.

But if you want to have it done for you, we do have have a club member who advertises his services for the restoration of stainless trim in our publications. His name is George Iverson in Minnesota. His phone is listed as 800/325-0480.. Not having used his service, I don't know anything about how well satisfied his customers are. But I'd think others can comment on that.

Good luck.

Keith Boonstra

-

On Sat, Jul 21, 2018 at 6:16 PM, Jim Pristelski ajp002@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

I would like your recommendations for who to use for stainless steel trim restoration, i.e., removal of dings, scrapes and the like.

Thanks, Jim




__._,_.___

Posted by: Keith Boonstra <kboonstra@xxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.