RE: [Chrysler300] F.I. D on e-bay

["'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Carl, cannot thank you enough. From this, it started as vacuum tubes, then progressed in R&D to transistors , 4 generations were mentioned. Inferring from the operating description , actually a very simple thing electrically. They seem  to be just adding varying amounts of resistors in a set of non linear sensors of ~ 5 parameters, in series, to an RC circuit that is controlling the injection pulse width. 20PSI rail, solenoid injectors(!); then a power amp, and a distributor to each probably 12 v injector..probably a roller contact. Same as today, in a way, but today a computer with look up tables is far more accurate today, than building curves into the sensors . But ideas are perfect, 100 % on. Correct idea but immature technology has been the bane of leading edge thinkers from the first wheel! 

 

I am hopeful one of us gets a real schematic. They were understandably holding the real workings secret when it was new..probably patents filed. Good ones I think! 

 

Analog circuits are surprisingly resistant to spike noise, so probably not EMI as much as widely varying voltages on a generator system, severe temperature drift effects all over the device and the engine temp /outside temp etc…

 

Nice try, we give it A+ 

 

From: Carl [mailto:cbilter@xxxxxxxxx] 
Sent: Tuesday, April 03, 2018 3:41 PM
To: John Grady; 'David Schwandt'; 'Allan'; 'chrysler300@xxxxxxxxxxxxxxx Club'
Subject: RE: [Chrysler300] F.I. D on e-bay

 

John, the attached might be helpful from an EE standpoint.  The modulator (brain) was solid state.   The system was inadequately shielded from EMI.   Agree, wish we could find an actual schematic.

Carl

http://soyeur.pagesperso-orange.fr/Mopar/SAE%20paper%20on%20Electrojector.pdf

 

 

From: 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx> 
Sent: Tuesday, April 3, 2018 12:07 PM
To: 'David Schwandt' <mailto:finsruskw@xxxxxxxxxxxxxxx> ; 'Allan' <mailto:agmoon@xxxxxxxxx> ; 'chrysler300@xxxxxxxxxxxxxxx Club' <mailto:Chrysler300@xxxxxxxxxxxxxxx> 
Subject: RE: [Chrysler300] F.I. D on e-bay

 

  

Really interesting what a real FI car might get. Even if an obvious wreck now….gotta like the Ford blue hemi and yellow wires, spliced radiator hose. .  .Wonder if he has the FI unit in an old box??  I have tried for years to get a wiring diagram of what was in them, how they worked, EE hat on .Really curious. Heard they had vacuum tubes, that would be something. Old enough to know about those, aka Philcojohn .That would mean a vibrator power supply in 57. Maybe very early transistor stuff. Bendix had mil connotations……

 

Does VIN id a fuel car in any way? Probably had a unique distributor to pick up needed signals…

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, April 03, 2018 10:44 AM
To: 'Allan'; chrysler300@xxxxxxxxxxxxxxx Club
Subject: [Chrysler300] F.I. D on e-bay

 






https://www.ebay.com/itm/202278640078?ul_noapp=true <https://www.ebay.com/itm/202278640078?ul_noap%20p=true&rmvSB=true> &rmvSB=true

 

Roster shows it is/was John Follie’s car, the junkyard guy in Williams, CA that is on the Forward Look site a lot.

I have sold him a few parts in the past.








 



[Non-text portions of this message have been removed]



------------------------------------
Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/