Re: [Chrysler300] 300D gas tank question

["George McKovich george@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Keith

I have them for $8 for two with free shipping.

George

On Jan 5, 2018, at 6:53 PM, Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

That's exactly how it's supposed to happen, Tom. There is a seal ring, which seals the filler tube to the tank, and it probably stayed stuck in the female opening of the tank. Your filler tube can be released and removed from the body quarter panel now if you wish while you re-install the tank. And then the filler tube can be sent back down the hole and simply pushed back into the tank opening. This would be a good time to obtain a fresh seal so you don't develop a new leak there. Van's in Wisconsin will have one if you have trouble finding it.

BTW, if you do ever remove the filler tube, first make careful note of its rotational position. There is a long stamped metal "vent" welded to the inside of the filler tube, and that must be in the UP position to allow air out of the tank as it is being filled. Just a little tip on a simple thing that drove many of us nuts trying to figure out the filling problem after putting our cars back together.

Keith Boonstra

300C

-

On Fri, Jan 5, 2018 at 5:53 PM, Tom Chvapil tomchvapil@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Good morning,

We pulled the gas tank out yesterday (to fix the pick up tube sock and sender), and in the process the filler tube separated from the tank. Is it designed to do this, or should it be part of the tank?

If it is separate, is there a seal or??? that needs to be used to make sure fuel doesn’t  leak out when filling the tank, or bouncing on my dirt road with the tank full?

Any input will be appreciated. 

Thanks,

Tom

Tom Chvapil

tomchvapil@xxxxxxxxx

__._,_.___

---

Posted by: George McKovich <george@xxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___