[Chrysler300] Fw[2]: 300F missing trim

["'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Replies to "Michael Van der veen" <michaelvanderveen8@xxxxxxxxx>

 

 

 

------ Forwarded Message ------

From: "Michael Van der veen" <michaelvanderveen8@xxxxxxxxx>

To: bob@xxxxxxxxxxxxx

Sent: 3/20/2017 9:10:49 PM

Subject: Fwd: 300F missing trim

 

Hi Bob are you able to please forward this to the list server please I can't get it to go there,

Thanks Mike

---------- Forwarded message ----------
From: "Michael Van der veen" <michaelvanderveen8@xxxxxxxxx>
Date: 20 Mar 2017 5:47 PM
Subject: 300F missing trim
To: <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Cc:

Hi group I'm hoping someone can help me by selling me a pair of trims off a 300F or I'm guessing possibly 300G.

 The trim I'm looking for is an extension of the sill step plates in the door sill area. It runs from the rear edge of the sill plate to beside the rear bucket seat and is held down through the carpet to the floor by oval headed screws . It looks to be anodized aluminium.

  The later cars have a short version of this for a full back bench seat.  I would think this is a 300 piece only I'd sure love to find a pair as I have none. 

Thanks guys and gals, fine weather here as we head into fall here, just home from the annual Chrysler's on the Murray in New south Wales. It's the biggest Chrysler show in the southern hemisphere! A great time was had,

Cheers

 Mike in Australia

__._,_.___

---

Posted by: "Bob Merritt" <bob@xxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___