Re: [Chrysler300] 1962 Rear Axle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1962 Rear Axle





The rear end from a 70 Challenger fits right in. I did that swap on a 62 Newport I had a few years ago.

If I remember right, the leaf spring perches were just 1/8 inch off compared to the 62, not enough to bother with moving them...

Jean-Yves.





From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of charlies@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: November 26, 2016 10:01 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 1962 Rear Axle
 
 

Hi Group,

I'm tired of fighting with the tapered rear axle assembly, as well as the "finiky" brakes in my 62. Does anyone know which Mopar rear axle will swap in. I'm probably going to install all wheel disc brakes in the near future as well. Comments appreciated. Thanks, Charlie in Ottawa.

 



__._,_.___

Posted by: Jean-Yves Chouinard <jymopar@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.