Hi Charlie: When we restored our 1962 300H convertible,
we swapped out the rear end housing with one from a 1965 new yorker so ended up
with 11X3 drum brakes in the back. The original 3:23 sure grip fit right into
new housing.
My recollection is that the new housing was only 1/2 an inch
wider.
Cheers from Fern located in Cranbrook SE BC
Sent: Saturday, November 26, 2016 3:01 PM
Subject: [Chrysler300] 1962 Rear Axle
Hi Group, I'm tired of fighting with the tapered rear axle assembly, as well as the "finiky" brakes in my 62. Does anyone know which Mopar rear axle will swap in. I'm probably going to install all wheel disc brakes in the near future as well. Comments appreciated. Thanks, Charlie in Ottawa. __._,_.___ Posted by: "Fern Rivard" <crc@xxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |