Hello 300’ly to all!
I just replaced the front ball and trunion u-joint
assembly on my C with the upgrade of the slip assembly more modern front u-joint
and I must say that I could not be more pleased. The car runs as smooth as
silk and is quieter. It almost feels like the vehicle is at peace with
itself! I had tremors develop between 30 and 40 mph upon easy acceleration
and again when accelerating above 60mph. The front U-joint had
1/16th inch play. The grease retention boot was replaced a
month ago when discovered that it left the party who knows how long
ago. The new u-joint was installed to the front of the driveshaft
which was balanced with the rear u-joint in place and then installed.
Precision Drive Shaft in Oklahoma City did all the work and obtained all the
parts . 3 day turn around time. $298.00. Many thanks to Club members
Mike Burke, George McKovich, Larry Jett, Murray Park and Jeff Carter for
discussing the upgrade and helping me decide to go this route! Rob
Kern
__._,_.___ Posted by: "Rob Kern" <robkern@xxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |