Re: [Chrysler300] Advice on engine repair

["Guy Morice guyztoys@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Sorry...that statement is not completely correct. AMSOIL makes several full synthetic choices. There is a line called Premium Protection, comes in 10W-40 and 20W-50. High zinc content. Then there is the Z-ROD line. Comes in 10W-30 and 20W-50. High zinc and high phosphorus content. These products are superior to any petroleum based oils. 

I am an AMSOIL dealer and will sell wholesale to any member shipped to your door. 

Guy Morice

Sent from my iPhone

On Mar 8, 2016, at 6:26 PM, 'Gary Nelson' gnelson@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Must use a high zinc content oil, not synthetic.

 

Gary

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Tuesday, March 08, 2016 1:00 PM

To: Matt Allyn

Cc: Michael Moore ; LUCKYL46@xxxxxxx ; Chrysler300@xxxxxxxxxxxxxxx

Subject: Re: [Chrysler300] Advice on engine repair

 

 

Quick question…at this cost of $9,000 to $10,000 for an engine rebuild is it recommended to run a synthetic oil like Mobile One in these 413 engines?  An engine rebuild could be half the value of my 300K.  What do other members run?  

 

Thanks,  Mark

Mark G. Miller, General Manager

Arthur L. Davis Publishing Agency, Inc.

ph. 800-626-4081 ext. 1303  cell 319-240-8083

f. 319-277-4055

nursingALD.com  *  ALDpub.com

 

 

On Mar 8, 2016, at 2:29 PM, Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 

I paid $3,500 to have one of my 413's done last year.

Plan to pay the same for another 413 to be done this year.

I also have paid $3,500 to rebuild a late 40's Ford Flathead last year; and that was with modern pistons, rods & a stroked crankshaft.

 

Matt Allyn

On Tuesday, March 8, 2016 11:33 AM, "Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Did you do the assembly and disassembly your self?

I might expect to see pistons  a big chunk of a  $1000 bill for a 413, pin fitted etc. 

Mike Moore

On Mar 8, 2016, at 10:59 AM, LUCKYL46@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 

i think it depends on wear you live. in NY i paid 3.000 for a complete rebuild. with machine work on a 383, and all new parts except pistons. just built a 454 Chevy 550 hp for  5.500     joe luciano   62 sport convt

 

 

 

 

__._,_.___

---

Posted by: Guy Morice <guyztoys@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___