RE: [Chrysler300] Brake shoe retainer/hold down spring - G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Brake shoe retainer/hold down spring - G





David:

 

The plumbing to front discs would certainly work, especially with a proportioning valve on the line to the rear brakes.  What would not be so easy is creating the redundant safety benefits of a dual MC and cross-wise braking.  Every element in the system from the firewall-mounted MC to each wheel must stay intact for the system to work.  Blow a hose or experience tube failure from corrosion or impact and it is time to grab the good old cable-actuated internally-expanding rear drum brakes and hope for the best.  Henry Ford will be looking down and saying “I told you so.”

 

I can’t recall where the front-rear splitter tee is located but it is probably underneath.  That makes access to tuning more difficult but not impossible.  I do believe that with some tuning of the “proportional valve” a front-disc/rear drum system on a ram K car could be made to work effectively with no loss or gain in redundancy/safety as compared to the existing single-line system.  Extra care and maintenance of the hoses, lines and fittings is warranted to assure this life-line stays intact.

 

Keep calm and 300 on,

 

Rich

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of David torquechap@xxxxxxxxx [Chrysler300]
Sent: Friday, August 14, 2015 8:01 AM
To: Rich Barber <c300@xxxxxxx>
Cc: Anna F Noia <sa-noia@xxxxxxxxxxx>; Ronald Kurtz <mark6268@xxxxxxxxxxxxx>; Ray Jones <1970hurst@xxxxxxxxx>; Rick Vitek <rpvitek@xxxxxxxxxxxxx>; Listsaver 300 Club <Chrysler300@xxxxxxxxxxxxxxx>; Chris Pinder <kmaniak@xxxxxxx>
Subject: Re: [Chrysler300] Brake shoe retainer/hold down spring - G

 

 

Hi Rich,

No OEM pro portioning valve on the '64. The remote booster makes disc brake conversions impossible. No manufacturers have been able to figure out a workaround. 

David


On Aug 14, 2015, at 12:34 AM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

I don’t believe there is a proportioning valve in our ’64 Ram K with the 3” rear drums & shoes.  Not that it might not be a good idea.  Anyone seen them on 300’s before 1999?  Mine get a little grabby in a hard stop—to rear lockup.  Not many hours on the new brakes yet.

 

The service manual indicates 3” drums and shoes on all ’64 300’s & NY’s.  2.5” rear drums on Newport only.  Length and material of lining are different.  Interesting footnote-Police car HD brakes are not self-adjusting.

 

The remote power brake booster on ram-engined cars makes disk brake conversion problematic.

 

Keep calm and 300 on.

 

Rich Barber

Brentwood, CA.

 

From: Anna F Noia [mailto:sa-noia@xxxxxxxxxxx]
Sent: Wednesday, August 12, 2015 6:46 AM
To: Ronald Kurtz <mark6268@xxxxxxxxxxxxx>; 'Ray Jones' <1970hurst@xxxxxxxxx>; 'Rick Vitek' <rpvitek@xxxxxxxxxxxxx>; Rich Barber <c300@xxxxxxx>
Cc: 'Listsaver 300 Club' <Chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] Brake shoe retainer/hold down spring - G

 

Ron K.

Remember when you add the extra stopping power with the 3" rear brakes shoes, you will need to adjust the proportioning valve for less stopping to the rear. I did a similar job on a Montego Cyclone, went from 2" to 2.5" shoes on the rear. I immediately had rear lock up on hard braking. A second thought, going to 3" rears, I assume your front are also 3", correct? Or, do you have disc brakes on the front? I would suggest going disc's all the way round, front and rear. The front are an easy change with several choices, all using stock Chrysler parts. The rear also can be done using the 74 Imperial Rear disc set up. Believe it or not, it bolts straight on to the 8.75 rear end from the 9.25 Imperial rear. I did this on my 66 Sport Fury Convertible, anyway Good luck with it all, any increase in "Brakes" is a Good Thing!

Best Regards,
Stephen A. Noia
1-408-210-4736 cell

 

 

On Tuesday, August 11, 2015 2:50 PM, "Ronald Kurtz mark6268@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 

Hello, all:

I converted the rear brakes on my "Knewport" to 3-inch rear brakes. What was needed to go from 2 1/2 inch to 3 inch drums and shoes are support plates that that can mount 3" shoes, hardware and a 3" brake drum. Mine works fine. Three-inch support plates drop back 1/2 inch to accommodate 3" drums on the axles.

Best,
Ron Kurtz
E #292

--------------------------------------------
On Sun, 8/9/15, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Subject: RE: [Chrysler300] Brake shoe retainer/hold down spring - G
To: "'Ray Jones'" <1970hurst@xxxxxxxxx>, "'Rick Vitek'" <rpvitek@xxxxxxxxxxxxx>
Cc: "'Listsaver 300 Club'" <Chrysler300@xxxxxxxxxxxxxxx>
Date: Sunday, August 9, 2015, 8:32 PM


 









Be very
careful to get the parts for HD brakes as the wider rear
shoes may require different springs and nails.  These may
be included under 300, wagon or HD suspension.
 Rich in Brentwood  with a 300 Ram K car having HD
brakes standard.  3” wide shoes & drums vs. 2 ½”
on most other ’64 Chryslers. Came to me with 2 ½” shoes
in the 3” drums.  Worked OK, but t’warn’t right. 
Shoe lining material and length on different ‘64’s were
different also, but that’s too much to ask.
 From: Chrysler300@xxxxxxxxxxxxxxx
[mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Ray
Jones 1970hurst@xxxxxxxxx [Chrysler300]
Sent: Sunday, August 09, 2015 11:10
AM
To: Rick Vitek
<rpvitek@xxxxxxxxxxxxx>
Cc:
Listsaver 300 Club <Chrysler300@xxxxxxxxxxxxxxx>; Ray
Jones <1970hurst@xxxxxxxxx>
Subject: Re: [Chrysler300] Brake shoe
retainer/hold down spring - G    Have you checked your local parts
house?This kinda thing is readily
available at any of the 4 parts houses here in
Mena.These springs, pins and cups are
generic, I believe, and fit thousands of
cars.Even if they don't have a kit
listed for your car, check what they have for
fit.I just bought kits for the rear of
my Hurst, and I'm sure the hold downs are the same as
any I have ever installed.The kits may differ due to the
other springs included, which may be different from model to
model, but the shoe hold down is the same.Ray  On Sun, Aug 9, 2015 at 11:05
AM, 'Rick Vitek' rpvitek@xxxxxxxxxxxxx
[Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
wrote: 
Looking for
the brake shoe retainer spring hardware (nail, 2 cups, coil
spring) for a G. Don't see it listed for this
application on internet searches. Does anyone know of a
source? I imagine this retainer length was used on other
applications and would be willing to get a hardware set for
that other application.

Thanks.



-- Ray Jones. Y'all
come on down an see us. Ya
hear?










#yiv4715659165 #yiv4715659165 --
#yiv4715659165ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}

#yiv4715659165 #yiv4715659165ygrp-mkp hr {
border:1px solid #d8d8d8;}

#yiv4715659165 #yiv4715659165ygrp-mkp #yiv4715659165hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}

#yiv4715659165 #yiv4715659165ygrp-mkp #yiv4715659165ads {
margin-bottom:10px;}

#yiv4715659165 #yiv4715659165ygrp-mkp .yiv4715659165ad {
padding:0 0;}

#yiv4715659165 #yiv4715659165ygrp-mkp .yiv4715659165ad p {
margin:0;}

#yiv4715659165 #yiv4715659165ygrp-mkp .yiv4715659165ad a {
color:#0000ff;text-decoration:none;}
#yiv4715659165 #yiv4715659165ygrp-sponsor
#yiv4715659165ygrp-lc {
font-family:Arial;}

#yiv4715659165 #yiv4715659165ygrp-sponsor
#yiv4715659165ygrp-lc #yiv4715659165hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}

#yiv4715659165 #yiv4715659165ygrp-sponsor
#yiv4715659165ygrp-lc .yiv4715659165ad {
margin-bottom:10px;padding:0 0;}

#yiv4715659165 #yiv4715659165actions {
font-family:Verdana;font-size:11px;padding:10px 0;}

#yiv4715659165 #yiv4715659165activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}

#yiv4715659165 #yiv4715659165activity span {
font-weight:700;}

#yiv4715659165 #yiv4715659165activity span:first-child {
text-transform:uppercase;}

#yiv4715659165 #yiv4715659165activity span a {
color:#5085b6;text-decoration:none;}

#yiv4715659165 #yiv4715659165activity span span {
color:#ff7900;}

#yiv4715659165 #yiv4715659165activity span
.yiv4715659165underline {
text-decoration:underline;}

#yiv4715659165 .yiv4715659165attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}

#yiv4715659165 .yiv4715659165attach div a {
text-decoration:none;}

#yiv4715659165 .yiv4715659165attach img {
border:none;padding-right:5px;}

#yiv4715659165 .yiv4715659165attach label {
display:block;margin-bottom:5px;}

#yiv4715659165 .yiv4715659165attach label a {
text-decoration:none;}

#yiv4715659165 blockquote {
margin:0 0 0 4px;}

#yiv4715659165 .yiv4715659165bold {
font-family:Arial;font-size:13px;font-weight:700;}

#yiv4715659165 .yiv4715659165bold a {
text-decoration:none;}

#yiv4715659165 dd.yiv4715659165last p a {
font-family:Verdana;font-weight:700;}

#yiv4715659165 dd.yiv4715659165last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}

#yiv4715659165 dd.yiv4715659165last p
span.yiv4715659165yshortcuts {
margin-right:0;}

#yiv4715659165 div.yiv4715659165attach-table div div a {
text-decoration:none;}

#yiv4715659165 div.yiv4715659165attach-table {
width:400px;}

#yiv4715659165 div.yiv4715659165file-title a, #yiv4715659165
div.yiv4715659165file-title a:active, #yiv4715659165
div.yiv4715659165file-title a:hover, #yiv4715659165
div.yiv4715659165file-title a:visited {
text-decoration:none;}

#yiv4715659165 div.yiv4715659165photo-title a,
#yiv4715659165 div.yiv4715659165photo-title a:active,
#yiv4715659165 div.yiv4715659165photo-title a:hover,
#yiv4715659165 div.yiv4715659165photo-title a:visited {
text-decoration:none;}

#yiv4715659165 div#yiv4715659165ygrp-mlmsg
#yiv4715659165ygrp-msg p a span.yiv4715659165yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}

#yiv4715659165 .yiv4715659165green {
color:#628c2a;}

#yiv4715659165 .yiv4715659165MsoNormal {
margin:0 0 0 0;}

#yiv4715659165 o {
font-size:0;}

#yiv4715659165 #yiv4715659165photos div {
float:left;width:72px;}

#yiv4715659165 #yiv4715659165photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}

#yiv4715659165 #yiv4715659165photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}

#yiv4715659165 #yiv4715659165reco-category {
font-size:77%;}

#yiv4715659165 #yiv4715659165reco-desc {
font-size:77%;}

#yiv4715659165 .yiv4715659165replbq {
margin:4px;}

#yiv4715659165 #yiv4715659165ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}

#yiv4715659165 #yiv4715659165ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}

#yiv4715659165 #yiv4715659165ygrp-mlmsg table {
font-size:inherit;font:100%;}

#yiv4715659165 #yiv4715659165ygrp-mlmsg select,
#yiv4715659165 input, #yiv4715659165 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}

#yiv4715659165 #yiv4715659165ygrp-mlmsg pre, #yiv4715659165
code {
font:115% monospace;}

#yiv4715659165 #yiv4715659165ygrp-mlmsg * {
line-height:1.22em;}

#yiv4715659165 #yiv4715659165ygrp-mlmsg #yiv4715659165logo {
padding-bottom:10px;}


#yiv4715659165 #yiv4715659165ygrp-msg p a {
font-family:Verdana;}

#yiv4715659165 #yiv4715659165ygrp-msg
p#yiv4715659165attach-count span {
color:#1E66AE;font-weight:700;}

#yiv4715659165 #yiv4715659165ygrp-reco
#yiv4715659165reco-head {
color:#ff7900;font-weight:700;}

#yiv4715659165 #yiv4715659165ygrp-reco {
margin-bottom:20px;padding:0px;}

#yiv4715659165 #yiv4715659165ygrp-sponsor #yiv4715659165ov
li a {
font-size:130%;text-decoration:none;}

#yiv4715659165 #yiv4715659165ygrp-sponsor #yiv4715659165ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}

#yiv4715659165 #yiv4715659165ygrp-sponsor #yiv4715659165ov
ul {
margin:0;padding:0 0 0 8px;}

#yiv4715659165 #yiv4715659165ygrp-text {
font-family:Georgia;}

#yiv4715659165 #yiv4715659165ygrp-text p {
marg



__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.