Re: [Chrysler300] Steering wheel centering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Steering wheel centering



I'm nearly certain the pitman arm on my '65 is indexed with a single large spline as well as the steering shaft to box and the steering wheel as Larry confirmed. Unless one or more of the replacement parts are incorrect, what else could it be? 90 degrees isn't really much when you consider he ratio of the steering boxes in these cars.

Sent from my iPhone

> On May 12, 2015, at 9:21 AM, paul paulholm@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> On 5/12/2015 12:08 PM, 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] 
> wrote:
>> 
>> 
>> I doubt 90 degrees is tie rod..but anything is possible..that is a lot
>> off. sounds like some part of column or attachment of pitman arm was
>> assembled incorrectly? What was done, and why?
>> 
>> *From:*Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
>> *On Behalf Of *Ryan Hill ryan_hillc300@xxxxxxxxxxx [Chrysler300]
>> *Sent:* Monday, May 11, 2015 10:52 PM
>> *To:* Larry Jett; chrysler300@xxxxxxxxxxxxxxx
>> *Subject:* RE: [Chrysler300] Steering wheel centering
>> 
>> 
>> 
>> 
>> My recollection is that the wheel, steering box, shaft and idler are all
>> indexed. I assume it was centered prior to disassembly and new parts
>> installed? The only adjustment should be at the tie rods. Are they
>> evenly adjusted? My suspicion is they aren't….
>> 
>> What to tell the dealer? If it is the tie rod adjusters that aren't
>> centred, I would ask for my money back and head to someone who
>> understands basics mechanics.
>> 
>> Ryan Hill
>> 
>> ------------------------------------------------------------------------
>> 
>> To: chrysler300@xxxxxxxxxxxxxxx <mailto:chrysler300@xxxxxxxxxxxxxxx>
>> From: Chrysler300-noreply@xxxxxxxxxxxxxxx
>> <mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx>
>> Date: Mon, 11 May 2015 19:36:53 -0700
>> Subject: [Chrysler300] Steering wheel centering
>> 
>> Had new parts installed on 1966 300 and dealer can not center steering
>> wheel.  It is off 90 degrees!!!  Isn't this a simple fix?  You can not
>> just recenter the wheel as it is indexed.  What do I tell the dealer?
>> 
>> Larry W Jett
> 
> HUmm, 1966 steering, I remember doing this on a 70, the mounting plate 
> that one of the hoses gos to on the steering box is ADJUSTABLE.
> Might lookup the proceedure for letting it 'center' itself,  think 
> barely loosen it, move it a hair, then start it up and see what happens 
> to the steering wheel, one way is yanked to the left, the other way is 
> yanked to the right, SO don't be holding the wheel when you start it
> 
> 
> 
> -- 
> Paul Holmgren
> The history of liberty is a history of resistance.
> The history of liberty is a history of limitations
> of governmental power, not the increase of it.
> - Woodrow Wilson, New York, September 9, 1912
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 


------------------------------------
Posted by: Ryan Hill <ryan_hillc300@xxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.