|
Hi Carl, I had a similar problem with my ’63 300 convert. The shim was falling apart and it could not be used again. I was able to find a NOS shim at a dealer out of state. I work with a company that can laser cut metal stock and they were able to cut me some shims in various thicknesses. I have some available. We just would need to confirm that the shims used for a ’63 would match a ’61. I will have to dig them out. Regards, Mark Lindahl In Suburban Chicago From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Carl Westman carl.j.westman@xxxxxxxxx [Chrysler300] When disassemble my rear axle on the G for an overhaul there was no shims adjusting the axle end play, i'm pretty sure i will need a set later on, any leads where to find those? Or any other way to solve the issue? //Carl __._,_.___ Posted by: "Mark Lindahl" <mplindahl@xxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap