Re: [Chrysler300] 300F Brakes

I agree with Bob. I had the same problem with the G on a couple of occasions. The front of the shoe locks against the drum until you wear down that layer of rust.

Pete Fitch

Sent from my iPhone

On Apr 6, 2015, at 2:37 PM, 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

How old are your brake hoses ? Sounds like they are collapsing internally, causing fluid not to return to the master cylinder.

Ron

On Mon, Apr 6, 2015 at 11:06 AM, Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

First nice day here in Dayton OH, so I fired up the 300F to get it out of winter storage. Engine started up just fine, but the brakes didn't. When I apply the brakes normally, they totally lock up. Backing up, by only a few inches, releases them, but normal stops again result in lock up. Before I tear into the brakes, any suggestions about I might be looking for? Terry McTaggart

__._,_.___

Posted by: Peter Fitch <pffkllc@xxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___