[Chrysler300] 413 motor I/d help

["christopher thelastbestgenius@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Chrysler 300F and Gs used 413s - very briefly, and maybe just offlist replies back to me -  how similar were 413s used in motorhomes - re good/same heads etc?
- and until what year were 413s built/used in say motorhomes?
Were the motorhome ones a much lower power/specs?!
 
The motor I am looking at apparently has prefixe "E'" stamped after "41" stamping on pad atop block, and has an alloy case auto trans bolted up, but trans still has handbrake on rear - alloy case is all one piece like later 727 torqueflights. I am looking at putting it in my '59 Dodge 2 dr - sump I need to do that has deep rear, whereas the 413 has the deep part of sump pan at front where it will foul the xmember - do the 300F/G have deep rear or deep front sumps?
 
Christopher in Australia  

__._,_.___

---

Posted by: christopher <thelastbestgenius@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___