Re: [Chrysler300] Rocker Molding Clips
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Rocker Molding Clips





Tom:
 
    Check Restoration Specialties (http://www.restorationspecialties.com).  If you don't see what you need, you can send them a sample and they will match it with their stock.  If they don't have it, they may make it, if they can see an adequate market.
 
Pete Fitch 
In a message dated 2/17/2015 10:47:07 A.M. Eastern Standard Time, Chrysler300-noreply@xxxxxxxxxxxxxxx writes:
 

Hi All,

I'm trying to find the Plastic Rocker Molding Clips that hold the rocker molding on my 1970 Hurst 300.
They have two "nail type" studs that they clip on to on the body. Any help would be appreciated. I have a few but also broke a few so I only have about half the number I need as they get quite brittle with age.

Weather is great in Vegas, been in the mid to upper 70's for awhile now, warm for us this time of year but we'll take it compared to what is happening back East.

Thanks,
Tom Kunkle  



__._,_.___

Posted by: pffkllc@xxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.