Re: [Chrysler300] 300F power steering hose

Does Gary’s pressure hose have fittings to allow routing up and over the driver’s side ram (like the originals) or is it the same as other aftermarket hoses that are designed for the single carb engine and must be routed around the driver’s side carb? This would apply to F,G, dealer or s.o. short ram H, J, ram K.

Carl Bilter

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Monday, February 16, 2015 3:20 PM

To: Bob Jasinski ; chrysler300@xxxxxxxxxxxxxxx ; 'David Schwandt' ; janne300@xxxxxxxxx

Subject: Re: [Spam] RE: [Chrysler300] 300F power steering hose

hi all 300 guys and gals .

gary has these hoses in stock ready for shippment.. i just asked him this morning on this subject ..

p.s. sill plates are still in the works for 60 to 64 but getting very close gary and i picked up the dies this morning.

now looking for some one to have them stamped .

bob hayen .... 55 degrees here in kalispell montana . the birds are chirpping , the sun is shining out of controll. yaaaaaaaaaaaa!!!!!!

----- Original Message -----

From: mailto:rpjasin@xxxxxxxxxxx [Chrysler300]

To: chrysler300@xxxxxxxxxxxxxxx ; 'David Schwandt' ; janne300@xxxxxxxxx

Sent: Monday, February 16, 2015 1:45 PM

Subject: [Spam] RE: [Chrysler300] 300F power steering hose

I would check with Gary Goers on the PS hose. That's where I got mine in 2011 for my 300G.

Bob J

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Monday, February 16, 2015 6:23 AM
To: janne300@xxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] 300F power steering hose

Wish I did, Jan as I could use one also.
Another repro project??
Should be the same for F and G
Maybe even J & ram K??
Would need to find an original for a pattern though.
Anyone have a Mfg'r in mind that could do this??

Dave Schwandt

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of 'janne300@xxxxxxxxx' janne300@xxxxxxxxx [Chrysler300]
Sent: Monday, February 16, 2015 4:02 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300F power steering hose

Hello all. Anyone know of a source for the Power steering pressure hose for
a 300F? NAPA, Auto Zone or other?
Thanks.
Jan Eriksson

------------------------------------
Posted by: "janne300@xxxxxxxxx" <janne300@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links