RE: [Chrysler300] 300F power steering hose
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300F power steering hose





Does Gary’s pressure hose have fittings to allow routing up and over the driver’s side ram (like the originals) or is it the same as other aftermarket hoses that are designed for the single carb engine and must be routed around the driver’s side carb?  This would apply to F,G, dealer or s.o. short ram H, J, ram K.
 
Carl Bilter
 
Sent: Monday, February 16, 2015 3:20 PM
Subject: Re: [Spam] RE: [Chrysler300] 300F power steering hose
 
 

hi all  300 guys and gals .
 
   gary   has  these  hoses in stock ready for shippment.. i just asked  him this morning on this subject ..
 
 
p.s.     sill plates are still in the works for 60 to 64 but getting very close                          gary and i picked up the dies this morning.
now looking for some one to have them stamped .
 
bob hayen ....   55 degrees here in kalispell montana . the birds are chirpping , the sun is shining out of controll.  yaaaaaaaaaaaa!!!!!!
----- Original Message -----
Sent: Monday, February 16, 2015 1:45 PM
Subject: [Spam] RE: [Chrysler300] 300F power steering hose
 
 

I would check with Gary Goers on the PS hose.  That's where I got mine in 2011 for my 300G.

Bob J

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Monday, February 16, 2015 6:23 AM
To: janne300@xxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] 300F power steering hose

 

Wish I did, Jan as I could use one also.
Another repro project??
Should be the same for F and G
Maybe even J & ram K??
Would need to find an original for a pattern though.
Anyone have a Mfg'r in mind that could do this??

Dave Schwandt

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of 'janne300@xxxxxxxxx' janne300@xxxxxxxxx [Chrysler300]
Sent: Monday, February 16, 2015 4:02 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300F power steering hose

Hello all. Anyone know of a source for the Power steering pressure hose for
a 300F? NAPA, Auto Zone or other?
Thanks.
Jan Eriksson

------------------------------------
Posted by: "janne300@xxxxxxxxx" <janne300@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links



__._,_.___

Posted by: "C Bilter" <cbilter@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.