RE: [Chrysler300] Power Window Gearbox Failure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Power Window Gearbox Failure



Yes, J-Y will be set up shortly to do this, along with the heater switches. Gears are made, for about 25 ..

 

From: Terry Mctaggart [mailto:terrymct999@xxxxxxxxx] 
Sent: Thursday, September 04, 2014 9:57 AM
To: David Schwandt; 'John Grady'
Cc: 'Listserver Chrysler Club'
Subject: Re: [Chrysler300] Power Window Gearbox Failure

 

Thanks John.  Glad to hear that there is a potential solution.  Can you give me more info?  I would like to buy 4 of those gears, and I need to know if I can send my bad gearbox to whoever and have a new gear pressed on.  Thankx again!  Terry

 

On Thursday, September 4, 2014 7:06 AM, David Schwandt <finsruskw@xxxxxxxxxxxxxxx> wrote:

 

Sounds like it’s time for an ad in the newsletter and on the web site.

Good to know info

Guess I have been lucky as I have had no problems yet!! Famous last words!!

 

Dave Schwandt

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]
Sent: Wednesday, September 03, 2014 9:44 PM
To: Terry Mctaggart
Cc: Listserver Chrysler Club
Subject: Re: [Chrysler300] Power Window Gearbox Failure

 





Hi Terry , I have made a few prototypes and then about 25 all metal gears of aluminum bronze . Had to cnc whole gear,  works very well . All the F style nylon gears will fail .. They get hard in oil and split around the rim . J-y up in Canada is running with this , as we had to make some simple tools to press gear off etc . So he can fix F box . May work for other years . This is the most commin box we think . We will also sell loose gears for those who can do it . We have the cnc program for a matsura cnc mill 

For once , good news !. 

On Sep 3, 2014, at 8:37 PM, "Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300]"<Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Terry McTaggart here.  Over the last few years, I have experianced two failures in the power window gearboxes in my 300F.   Both failures were identical, in that the plastic gear teeth surrounding the metal disk inside the gearbox broke, rendering the gearbox useless.  Fortunately I had two spares in the attic and was able to replace the offending part.  Now, however, I have no more spares and the next failure (if there is one) will be a major problem.  Has anyone else experienced this failure, and if so, might this be a good project for the repro committee?







 



[Non-text portions of this message have been removed]



------------------------------------
Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.