|
Hi 300 Fans,
Just an update on these earlier messages -- I've changed the coil and the ballast resister, and the car has run fine since then. I can't guarantee that was the problem, but things are OK now. I appreciate the feedback from the site. Al Vannice From: Chrysler300@xxxxxxxxxxxxxxx [Chrysler300@xxxxxxxxxxxxxxx] on behalf of 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] [Chrysler300-noreply@xxxxxxxxxxxxxxx]
Sent: Friday, June 20, 2014 4:03 PM To: Albert Vannice; 'Charles Kreszock'; Chrysler300@xxxxxxxxxxxxxxx Subject: RE: [Chrysler300] Fall Meet ln Mystic Coil is first suspect, and ballast resistor…just change them, Can leave voltmeter or test bulb on ignition feed at ballast , wire to inside car be sure 12v is there when it stops..a start ; plus of course, point adjustment, but usually that shows up as missing running poor then stop From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of Albert Vannice mavche@xxxxxxxxxxxx [Chrysler300]
Hello Everyone, I also would like to state how much I enjoyed the meet and the attendees-- thanks again to the Coles. In addition, I would like to relate a problem that occurred on the way back to PA. I was on I-691 happily rolling along early Sunday morning when my J just stopped running. I coasted off on an exit, checked under the hood but saw nothing obviously wrong, and after sitting for 3-4 minutes it started and I drove all the way home until I got a mile from my home and the same thing happened. Again, after sitting for 3-4 minutes it started and I got home. Two days later after 4-5 minutes driving to my mechanic's shop the same thing happened. At the shop they found a very loose wire to the distributor and thought that was the trouble, but on the way home the same event happened again. Turning on the electrical fuel pump has no effect. While it's stalled, I'm getting gas from the accelerator jets but it still won't start until further sitting. It acts like an intermittent electrical problem, but I don't know exactly where to start looking. Any suggestions are more than welcome. Al Vannice From:
Chrysler300@xxxxxxxxxxxxxxx [Chrysler300@xxxxxxxxxxxxxxx] on behalf of Charles K reszock
kreszockcm@xxxxxxxxxxxx [Chrysler300] [Chrysler300-noreply@xxxxxxxxxxxxxxx]
All,
< span style="font-size:9.5pt;color:white;"> __._,_.___ Posted by: Albert Vannice <MAVCHE@xxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap