Fw: [Chrysler300] Need help

["GERALD OLSON olson77@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

On Monday, July 28, 2014 7:24 PM, GERALD OLSON <olson77@xxxxxxxxxxxxx> wrote:

How bad can that tool be rite from the source Ron? Looks pretty simple as tools go to me. Call 'um, they might surprise you. SPX MILLER SPECIAL TOOLS 1-800-801-5420 in Warren, Mi. 12 mile and mound BTW.

On Monday, July 28, 2014 1:29 PM, "Ronald Kurtz mark6268@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 Hello, everyone:

If anyone has a Miller C - 3281 transmission flange tool or something similar. I would like to borrow it for a day. When the 1964 727 trans was rebuilt, the mechanic installed the level and spacer before installing the parking lock sprag. Hence the transmission cannot be put into park and these two pieces cannot be installed properly without removing the extension housing (unless someone has some tips on how to this without this or has rigged something that works).

I will gladly pay S&H and send a deposit for the tool, as it rather expensive to buy for only one-time use. Any help would be greatly appreciated.

Best,

Ron Kurtz

E #292 

__._,_.___

---

Posted by: GERALD OLSON <olson77@xxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___