[Chrysler300] Need help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Need help





 Hello, everyone:

If anyone has a Miller C - 3281 transmission flange tool or something similar. I would like to borrow it for a day. When the 1964 727 trans was rebuilt, the mechanic installed the level and spacer before installing the parking lock sprag. Hence the transmission cannot be put into park and these two pieces cannot be installed properly without removing the extension housing (unless someone has some tips on how to this without this or has rigged something that works).

I will gladly pay S&H and send a deposit for the tool, as it rather expensive to buy for only one-time use. Any help would be greatly appreciated.

Best,
Ron Kurtz
E #292 



__._,_.___

Posted by: Ronald Kurtz <mark6268@xxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.