Don’t forget to use blue stabil, not the good old red.
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx?] On Behalf
Of retromobilia
Sent: Wednesday, January 29, 2014 9:17 AM
To: John L. Chesnutt
Cc: Chrysler300
Subject: Re: [Chrysler300] 110 octane gas
Right on! The ethanol free gasoline is a
gift. In Lower California (which in
history was always leading the curve,) not now; our closest real gas is 265
miles away in a marina at lake Mead, AZ. As long as you use your car regularly
you are in good shape.
Here I store several cars and each gets about 500 miles per year. So stable gas
is
paramount.
I am not certain of the modern formulation of Efree gas. Most modern fuels are
built for sealed fuel systems which have no air or very little accompanying or
standing on the fuel.
The gas I use is built for 20 years storage in vented tanks.
JJ
PS: on a recent drive through the desert in, 2012 Chrysler derivative, car. I
filled up with E-Free gas. I calculate the milage, by app. on fuelly.com, and
that leg netted 25% better milage over the ethanol fill-ups.!?
PPS: constantly running 80-90 mph traffic free old two-lane US routes, using
both types of fuel. Not totally scientific but significant.
_____
From: "John L. Chesnutt" <chesnutt@xxxxxxxxxxxx>
To: "Rob Kern" <robkern@xxxxxxxxxxxxx>, Chrysler300@xxxxxxxxxxxxxxx, "Carlton
Schroeder" <schroe99@xxxxxxxxxxxx>
Sent: Wednesday, January 22, 2014 9:26:46 PM
Subject: RE: [Chrysler300] 110 octane gas
Hi Rob and Carlton,
Our 300C has 10 ½ :1 compression which I changed to in 1972 (complete engine
rebuild). It runs fine on pump gas and I intend to use only 91 ethanol free gas
the next time I fill the tank. We have three ethanol free gas stations just
outside of Portland, OR. With the 10 ½ compression the 300C goes like a bomb. We
live on a hill 700 feet elevation above Portland in the
West Hills.
John C.
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx?] On Behalf
Of Rob Kern
Sent: Wednesday, January 22,
2014 5:55 PM
To: Chrysler300@xxxxxxxxxxxxxxx; Carlton Schroeder
Subject: Re: [Chrysler300] 110 octane gas
Carlton,
Octane does not equate to power. I did a 50/50 mix of 93 octane unleaded with
110 octane racing fuel in my C. After a while the car started to run rough and I
was told that a lot of lead deposits and carbon was probably getting on the
valves. I stopped using this mix and used a container of seafoam cleaner per
tank of 91 ethanol free with a can of octane treatment which brought octane to
93. This I did for two full tanks of fuel. Car runs smooth and I don’t have any
ping or dieseling in hot weather when shutting off the engine. For the 9.25:1
compression ratio on the standard 300C 392 Hemi, you really don’t need any more
than 93 octane. What is best is if you can get ethanol free gas. 300’ly, Rob
Kern
From: Carlton Schroeder <mailto:schroe99@xxxxxxxxxxxx?>
Sent: Wednesday, January 22, 2014 10:52 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 110 octane gas
Hello,
It just came to my attention that right here in Eagle River, WI I can drive up
to a gas pump and load my 300C with leaded, non-ethanol, 110 octane gas; I just
have to tell a white lie and say I am using my car for ‘off road purposes’. It
does cost $7-8 per gallon and originates at a
Sunoco refinery in PA. The pump
actually says 115 octane but by some government definition / computation method
/ regulation the supplier says it is designated 110 octane.
The supplier says most people (local racers) that buy it mix about 1 gallon of
the 110 octane gas with 3 gallons of non-ethanol premium which is readily
available around here.
I think the higher octane is primarily to prevent pinging in higher compression
engines and that hasn’t been a problem for me, but getting the lead-in seems
like it would be helpful. I only drive this 300C 200-300 miles a year.
I would appreciate advice or opinion about how to use this 110 octane gas.
Thanks,
Carlton Schroeder (in very cold and snowy Eagle River, WI - snowmobile capital
of the world)
[Non-text portions of this message have been
removed]
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave
Group" button
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo
Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo Groups is
subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/