Re: [Chrysler300] mirror-matic

Johnnie, further to my last post the "H" terminal is the light green 16ga wire. It is a single terminal. The factory would have provided a jumper to connect to it. Simply splice to the light green wire, or, if you want, I"ll make up a jumper for you.

Greg

Sent from my iPad

On Jan 10, 2014, at 11:21 PM, Greg Leggatt <ggleggatt@xxxxxxxxx> wrote:

Hi guys,
I think you will find the "aux" is hot all the time. I'd hook to "H", which is headlights only.
Greg

Sent from my iPad

On Jan 10, 2014, at 11:03 PM, "Bob Jasinski" <rpjasin@xxxxxxxxxxx> wrote:

Johnnie,

Per the accessory section in the '60 service manual, the Mirror-Matic is powered from the headlight switch, as it is only meant to be energized when the headlights are on. I believe you will find an aux terminal on the switch, or double up on one of the switched outputs..

Bob J

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Jslayton@xxxxxxxxxx
Sent: Friday, January 10, 2014 5:24 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] mirror-matic

I have a new mirror-matic to install on the G coupe I am working on-----it has a lead wire coming out of it----can someone tell me where it goes ?---is there anything else I am missing ?-----I can't find much info on it in the service manual-----THANKS--------Johnnie Slayton

__._,_.___

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___