1966 Chrysler 300 rag…..delicious car belonging to an Apple exec. Standard engine and runs terrific. Had it aligned yesterday and on the way home the bright red no oil pressure light comes on. Check of the dip stick shows full of brand new oil, the same I put in months ago so I'm guessing bad sender and drive two miles home. Today I remove the valve covers and find a spotlessly clean rocker set up and all 16 pushrods pushing and all 16 rockers rocking. This lets out a stuck valve and a bent or missing pushrod. and/or popped out tappet All the rockers are starting to sound noisy. I remove the sender and crank the engine. No oil shoots out.. Is it likely that an oil pump failed? Do I need to remove the oil pan and check the pickup and strainer? Messy and hateful job. Some of you may suggest I contact the 1966 300 Consultant of the Inc. Club, but that is me and I already checked with me. Now checking with you. Larry Jett LarryWJett@xxxxxxxxx ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/