Car starts fine when cold, turns over quickly. Barely, or doesn't turn over fast enough when hot. I have upgraded the relay to starter cable to #2 wire. 413 has perhaps 1000 miles on it since rebuild. Starting motor has less than that as I put in a rebuilt about 400 miles in. Terminals all clean & tight. Aside from pulling the starter out and having it gone through, anyone have any other ideas? A friend suggested a cole-hersee relay might help, but I have my doubts. Thks Lindsey in Winnipeg ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/