Re: [Chrysler300] Door Moisture barriers

[Jack Boyle <jackcboyle@xxxxxxxxx>]

Use gorilla tape. Not generic duct tape. 


Jack Boyle

On May 12, 2013, at 8:13 AM, "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx> wrote:

> I'll swing by Menards on the way down to the meet and pick up a roll of
> black duct tape, some dum-dum, a box cutter and some viz-queen and we can
> crank out dozens of them in the parking lot one evening over a few beers. 
> 
> Dave Schwandt
> 
> -----Original Message-----
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
> Behalf Of Jamie Hyde
> Sent: Saturday, May 11, 2013 5:42 PM
> To: 'Chrysler300@xxxxxxxxxxxxxxx'
> Subject: [Chrysler300] Door Moisture barriers
> 
> 300 Letter Car World, I am doing another small restoration project that may,
> or may not interest you, or apply to your car but, I have found a vendor who
> is willing to reproduce the plastic moisture barriers that cover the door
> sheet metal, and that are located behind the door panel itself, or in the
> case of the rear panel, next to the seat. He currently makes these for the A
> and B body crowd, and has expressed a desire to reproduce these for the C
> body Chrysler cars as well, his kits will include the special adhesive bead
> if required, I don't yet know about the wide black tape. What started this
> was I was talking to him about another project he just finished, and that is
> the beautiful Glove Box Warranty card kits. He knew that I have a 65 300 L
> convertible and mentioned the idea of doing these plastic sheets for the C
> body's but, stated he had no patterns to work from. Well now (in the mail
> tomorrow) he has my 65 convertible parts, and a friend of Jack Bettino's
> just provided me with the 1965 hard top samples this afternoon. This friend
> of Jacks (non letter car guy) also had the 66-68 2 door hardtop samples as
> well, different hole for the front door release, it is square verses, the 65
> round and are going to be included in my shipment. So my request is for
> fellow 300 club members to check their spare parts for pre 64 moisture
> barriers, in both hardtop and convertible applications. I do know that at
> some point on the prior models, according the Vendor, these plastic barriers
> were not used, but I trust our members to provide data as to what years the
> barriers were used, or not used. If you would like to deal directly with the
> Vendor, his name is David Patrick at Performance Car Graphic's @
> 850-878-1450 . As a motivation he was offering to reproduce the first set of
> the patterns that he does not have for free, and may continue to extend
> this offer to other members. If you would rather not deal with David, and
> are willing to bring the barriers to the spring meet, I will mail them down
> to him for you. I will have a complete set of A body barriers that he makes,
> with me the spring meet for your inspection. Plus you just have to see these
> 1965 warranty card kits in person, they are stunning. It is one more reason
> to attend, see ya soon.
> 
> Jamie Hyde
> 585-321-2721 Office
> 585-465-0067 Cell
> 
> [Non-text portions of this message have been removed]
> 
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to
> http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave
> Group" button
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to
> http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups
> Links
> 
> 


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/