Henry is on the right track. <br/><br/>A quality 8mm black wire set for a 440 will give you all the wire you need. You will reuse the ends from your Atlas set. <br/><br/>Laquer thinner or other good solvent will remove the white or orange printing. <br/><br/>Using modern wire that is capable of handling CDI ignition will handle the original points/coil ignition. <br/><br/>For the distributor, reuse the straight black ends and red ends for center & #1. <br/><br/>Reuse the red right angle spark plug ends and the 135 degree end near oil dip stick. <br/><br/>Bendable red ends are available for that purpose if you do not have the 135 end. <br/><br/>Tony<br/>300-F Conv't<br/><br/><br/>Sent from Yahoo! Mail for iPhone [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/