Re: [Chrysler300] Ignition Cables/Sure Grip or not?

[Michael Falcone <mjf175@xxxxxxx>]

I have a used Petronix before and its works great. The instructions say to eliminate the ballast resistor by connecting the two wires together which I did. I took the resistor apart and put a piece of wire with two terminals in the original ceramic block so it looks original.
 

 

 

-----Original Message-----
From: RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>
To: Rich Barber <c300@xxxxxxx>; mark6268 <mark6268@xxxxxxxxxxxxx>; chrysler300 <chrysler300@xxxxxxxxxxxxxxx>
Sent: Sun, Feb 3, 2013 6:19 pm
Subject: RE: [Chrysler300] Ignition Cables/Sure Grip or not?



Rich;
    Being the Petronix connects to the Positive and negative sides of the coil, 
It cranks full voltage and runs on post resistor voltage. Limited slip 
differentials in good condition will rotate the wheels in the same direction in 
neutral and seem locked when only one wheel is lifted.
 



To: mark6268@xxxxxxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx
From: c300@xxxxxxx
Date: Sun, 3 Feb 2013 17:58:36 -0800
Subject: RE: [Chrysler300] Ignition Cables/Sure Grip or not?

  



I'm also curious as to whether the Petronix system starts on 12 V and runs
on lower voltage fed through the ignition resistor-or just a full 12 V at
all times?

Second question: How does one check for a Sure-Grip differential in a
non-op car? With one rear wheel jacked up and the tranny in neutral should
the jacked-up wheel turn freely or lock up? With both rear wheels jacked
up, does turning one wheel cause the other to rotate in the same or reverse
direction?

Rich Barber

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Ronald Kurtz
Sent: Sunday, February 03, 2013 1:31 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Ignition Cables

Hello, everyone:

What is the best ignition cable and coil to use with a Petronix Flamethrower

distributor? I am thinking about upgrading my ignition system.

Best,
Ron Kurtz
E #292

[Non-text portions of this message have been removed]




 		 	   		  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave 
Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! 
Groups Links




 


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/